CATV Accessories

Hybrid Amplifiers

AS 1313

  • High output level
  • External pp switch
  • Led for pp selection
  • Separate in/out fuses
  • Hybrid ic protected
  • Double output 900 mhz

AS 1313 AC/DC

 

  • Low Power Consumption Drive More Amplifiers
  • Special 6 Volt Module -For High Output

Multiple Power Options:

  • 12 Volt DC Adapter
  • DC Power Pass 40V
  • AC Power Pass upto 110 V

AS 1111

  • Frequency Range: 40 ~ 900 MHz
  • Output Level: 102 dBµV
  • Separate IN & OUT Fuses
  • Level Flatness: ±0.75 dB
  • 32 dB Gain (40 dB Optional)
  • Incorporates Good Quality
  • Hybrid IC Module
  • Hybrid IC Protected

AS 1515

  • Frequency Range: 40 ~ 1000 MHz
  • Mains cum Power Pass
  • Output Level: 102 dBµV
  • Level Flatness: ±0.75 dB
  • 32 dB Gain (40 dB Optional)
  • Optimum for
  • Trunk Distribution
  • Superior Quality
  • Hybrid IC Module
  • Hybrid IC Protected
  • Voltage Selection LED – for
  • Easy Selection

AS 1616

  • Frequency Range: 40 ~ 860 MHz
  • Mains cum Power Pass
  • Output Level: 102 dBµV
  • Level Flatness: ±0.75 dB
  • 32 dB Gain (40 dB Optional)
  • Optimum for Trunk Distribution
  • Superior Quality Hybrid IC Module
  • Hybrid IC Protected
  • Voltage Selection LED – for Easy Selection

Optic Nodes

OX 752

  • High Quality Nodes

  • Frequency 40 ~ 1000 MHz

  • Good Sensitivity of -11 dBm

  • RF O/P 110 dBµV at 0 dBm Optic I/P

  • High Voltage Surge Protection

  • LED Optic Level Display

  • Powder Coated Housing

OX 755

  • High Quality Nodes cum Amplifier

  • Frequency 40 ~ 1000 MHz

  • Good Sensitivity of -11 dBm

  • RF O/P 110 dBµV at 0 dBm Optic I/P

  • High Voltage Surge Protection

  • LED Optic Level Display
  • Powder Coated Housing

OX 732 DOUBLE IC

  • Frequency 40 ~ 1000 MHz

  • Optical Wavelength : 1290 ~ 1600 nm

  • Flatness ±0.75 dB

  • LED Bar Display for Optic Signal Level

  • High Voltage Surge Protection
  • -11 dBm Sensitivity

  • RF O/P at 0 dBm : 110 dBµV

OX 733 Triple IC

  • Frequency 40 ~ 1000 MHz

  • Optical Wavelength : 1290 ~ 1600 nm

  • Flatness ±0.75 dB

  • LED Bar Display for Optic Signal Level

  • High C/N, CSO & CTB Characteristics

  • -13 dBm Sensitivity

  • RF O/P at 0 dBm : 113 dBµV

FTFA

FTFA 844

  • Auto Switch over from Fiber to RF & Vice versa

  • Works as Transmitter & Fiber Amplifier

  • AGC / MGC – Automatic & Manual Gain Control

  • RF Input : 78dB ~ 90dB
  • Optical Input : -8dBm ~ +2dBm

  • Optical Wavelength : 1310nm

  • Power : 110VAC ~ 240VAC, 50Hz

FTFA 822B

  • Work as Transmitter & Fiber Amplifier

  • AGC – Automatic Gain Control

  • Built in RF Booster

  • Higher RF at next connected Node

  • Maintain MER/BER for Digital FTTH Transmission

  • Variable SLOPE Control

  • Output Wavelength : 1310nm

AGC Fiber Amplifier

FANS 811 - 812

  • AGC – Automatic Gain Control

  • Higher RF at next connected Node

  • Maintain MER/BER for Digital FTTH Transmission

  • High Quality DFB Lasers with Isolators

  • Variable SLOPE/GAIN Control

  • Input Wavelength : 1310/1550nm

  • Output Wavelength : 1310nm

  • Digital Display of Optical Level

AGC 801

  •  Built in RF Booster
  • Higher RF level at the next Connected Node
  • Maintains MER/BER
  • AGC : -7dBm ~ +3dBm
  • High Quality DFB Laser
  • Optical Isolator Incorporated
  • Variable Gain Control

DC Supply & PSP

DC Supply 40 Volt - 2 Amp

  •   Highly Integrated Switch Mode Power Supply
  • 40V/2 Amp Stabilized DC Supply
  • High Filtration for Better Picture Quality
  • Short Circuit Protection
  • Avoid Hum Interference
  • 2KV Isolation between RF & DC
     

Dual DC Supply

  • Stabilized Power Output

  • Isolates RF Signal

  • Avoid HUM Interference

  • Highly Integrated SMPS

Smart PSP

  • For Faster Charging of Battery Node

  • For Longer Distance Power to DC Node

  • Isolated RF Port – Protects STB/TV

  • DC to DC Cable 2.5/1.5mm Ports

  • Can be used as a Stand Alone Adapter

PSP

  • Acts as a Spike Protector for STB/TV

  • ABS Plastic housing

  • DC to DC Cable – 2.5/1.5mm Ports

  • Isolated RF Ports (Total Spike Protected)

Combo PSP

  •  For Fast Charging of Battery Node
  • For Long Distance Power to DC Node
  • Power for All DC Battery Devices like:
    FTFA, Transmitter, Nodes, Amplifiers in Network
  • Isolated RF Ports Protects STB/TV

Battery / DC Nodes

OX 722/724/728

  • 2 Ports DC Power Pass
  • External fuses for DC Power Pass
  • 6 Volt Module
  • Operating Voltage : 8V ~ 50V DC
     

OX 722B/723B/724B

  •  7.4V DC, 2600mAH Battery

  • Output Level : 105dB

  • Sensitivity : -12dBm

  • Battery Back UP of 20 Hours

  • 7V ~ 50V DC Input

  • Low/High Battery – Auto Cut Off

  • Built in Battery

OX 712 EX / OX 714

  • 8V~50V DC Input

  • 2 Port DC Power Pass

  • External Fuses for DC Power Pass

  • Output Level : 106dB

  • Sensitivity : -15dBm

  • Operating Voltage : 8V ~ 40V DC

  • Output Level : 105dBm

OX 708 / OX 704 / OX 702

  •   Operating Voltage : 8V ~ 50V DC

  • Output Level : 100dBuv

  • Input Sensitivity : -8 dBm

  • Frequency Response : 40~1000 MHz

  • Optical Level Indicator Incorporated

Battery / DC Amplifier

AS 312

  •   Operating Voltage : 8V ~50V DC

  • DC Power Pass

  • Frequency Response :  40 ~ 1000 MHz

  • Output Level :  105dBµV

  • Gain : 32 dB

  • External Fuses for DC Power Pass Cutoff

AS 322 & AS 324

  •  2 Ports DC Power Pass
  • External Fuses for DC Power Pass cut off
  • 8V~50V DC Input
  • Output Level : 106 dB
  • 40~900 MHz
  • Accepts DC from All Ports
     

AS 322 B & AS 324 B

  • 7.4V DC, 2600 mAH Battery

  • Built in Battery Charger

  • Low/High Battery Cut off

  • 8V~50V DC Input

  • 6 Volt Module

  • Variable Gain & Slope

  • Output Level : 106 dB

     

Tapoff & Splitter

DC Tap Off & Splitters

  •  Low Insertion Loss

  • High Return Loss

  • Mutual Isolation>22dB

  • Reflection Loss >16dB

  • Frequency 5~1000 MHz

Micro Node & Filter Node

OX 705

  • Optic Sensitivity :  +3dBm To -7dBm

  • Frequency Range:  1000 MHz

  • 65dBuv RF OUT  (At 0dBm)

  • OX 705 – 4 Way Micro Node

OX 706

  • Optic Sensitivity :  +3dBm To -7dBm

  • Frequency Range:  1000 MHz

  • 65dBuv RF OUT  (At 0dBm)

  • OX 706 – 2 Way Micro Node

OX 707

  • Optic Sensitivity :  +3dBm To -7dBm

  • Frequency Range:  1000 MHz

  • 65dBuv RF OUT  (At 0dBm)

  • OX 707 – 1 Way Micro Node

PON EDFA

PON EDFA

  •  ErYb Co-Doped DCF Technology
  • SNMP Network Management
  • APC – Auto Power Control
  • ATC – Auto Temperature Control
  • Double SMPS Supply
  • Perfect Network Management